Gigabyte B450 AORUS ELITE | B450 | AM4 | 128 GB | ATX | Gen 3

Dual channel memory architecture

Support for DDR4 3600(O.C.)/3466(O.C.)/3200(O.C.)/2933/2667/2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz * The DVI-D port does not support D-Sub connection by adapter.

1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz

* Support for HDMI 2.0 version, HDCP 2.2, and HDR.

Maximum shared memory of 16 GB

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

(Note) Actual support may vary by CPU.

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x PCI Express x16 slot, running at x4 (PCIEX4)

1 x PCI Express x1 slot

(The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.)

1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SOCKET)

2 x SATA 6Gb/s connectors (ASATA3 1/2)

Integrated in the Chipset:

1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x2 SSD support) (M2B_SOCKET)

4 x SATA 6Gb/s connectors (SATA3 0/1/2/3)

Support for RAID 0, RAID 1, and RAID 10

* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

4 x USB 3.1 Gen 1 ports on the back panel

Integrated in the Chipset:

2 x USB 3.1 Gen 2 Type-A ports (red) on the back panel

2 x USB 3.1 Gen 1 ports available through the internal USB headers

6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

1 x 8-pin ATX 12V power connector

1 x CPU fan header

3 x system fan headers

2 x M.2 Socket 3 connectors

6 x SATA 6Gb/s connectors

2 x addressable LED strip headers

2 x addressable LED strip power select jumpers

1 x CPU cooler LED strip/RGB LED strip header

1 x RGB (RGBW) LED strip header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.1 Gen 1 header

2 x USB 2.0/1.1 headers

1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only)

1 x serial port header

1 x speaker header

1 x Clear CMOS jumper

1 x chassis intrusion header

2 x USB 2.0/1.1 ports

1 x DVI-D port

1 x HDMI port

4 x USB 3.1 Gen 1 ports

1 x RJ-45 port

2 x USB 3.1 Gen 2 Type-A ports (red)

6 x audio jacks

Temperature detection

Fan speed detection

Overheating warning

Fan fail warning

Fan speed control

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

AutoGreen

Cloud Station

EasyTune

Fast Boot

Game Boost

ON/OFF Charge

RGB Fusion

Smart Backup

Smart Keyboard

Smart Survey

System Information Viewer

USB Blocker

Support for Q-Flash

Support for Xpress Install

Realtek® 8118 Gaming LAN Bandwidth Control Utility

Support for Windows 7 64-bit

* To support Windows 7 64-bit, you must install an AMD Pinnacle Ridge & Summit Ridge CPU.

* Please download the “Windows USB Installation Tool” from GIGABYTE’s website and install it before installing Windows 7.